Seasonal variability of endotoxin in ambient fine particulate matter

Endotoxin is a toxic, pro-inflammatory compound that has been detected in indoor air and dust in homes and occupational settings, and also in outdoor air. Data on the outdoor sampling of endotoxin are limited. Currently, little is known about the seasonal variation and influence of temperature on outdoor endotoxin levels. In the present study, we report endotoxin levels in fine fraction particulate matter with a 50% aerodynamic cutoff diameter of 2.5 microm (PM2.5) and describe the seasonal variation of endotoxin in Munich, Germany. In 1999-2000, PM2.5 was collected at forty outdoor monitoring sites across Munich. Approximately four samples were collected at each site for a total of 158 samples. Endotoxin concentrations in the PM2.5 samples were determined using the kinetic chromogenic Limulus Amebocyte Lysate (LAL) assay. The geometric mean endotoxin concentration was 1.07 EU mg PM2.5(-1) (95% C.I.: 0.915-1.251) or 0.015 EU m(-3) of sampled air (95% C.I.: 0.013-0.018). Munich endotoxin levels were significantly related to ambient temperature (p < 0.0001) and percent relative humidity (p < 0.0001). Sampling periods with higher average temperatures yielded higher levels of endotoxin in PM2.5 (r = 0.641), whereas decreases in percent relative humidity were associated with increased endotoxin levels in PM2.5 (r = -0.388). Endotoxin levels were significantly higher during the warmer seasons of spring [means ratio (MR): 2.5-2.7] and summer (MR: 2.1-3.0) than during winter. Although temperature and relative humidity do not explain all of the variability in endotoxin levels, their effects were significant in our data set. Temperature effects and seasonal variation of endotoxin should be considered in future studies of outdoor endotoxin.     

Postgraduale Weiterbildung, Nachwuchsf?rderpreis 2005, Jahrestagung 2006 in Landau

Ohne Zusammenfassung     

Behavioral diversification in a young species flock of pupfish (<Emphasis Type="Italic">Cyprionodon</Emphasis> spp.): shoaling and aggressive behavior

Increasing empirical and theoretical evidence supports the idea that sympatric speciation is operating, for example, in species flocks comprising several closely related fish species within one lake. Divergent natural selection (promoting spatial and food niche partitioning) and sexual selection (assortative mating) have been identified as key selection factors in intralacustric adaptive radiations. However, the evolution of social behaviors accompanying such adaptive radiations is less well understood. Using a phylogenetically young species flock of pupfish (Cyprinodon spp.) as a model, we examined differences among six sympatric species and compared their shoaling, aggressive, and territorial behaviors with that of a sister species (C. artifrons). Despite an estimated age of the species flock of less than 8,000 years, pronounced behavioral differentiation was found. C. simus, the smallest species in the flock, shoaled more than the other species and was less aggressive and less territorial than C. beltrani. F₁-hybrids between C. simus males and C. beltrani females showed an intermediate expression of shoaling and aggressive behavior. Niche partitioning among the members of this species flock appears to be accompanied by rapid divergent evolution of social behaviors. We discuss the potential role of phenotypic plasticity and within-species variation of social behaviors for such rapid behavioral diversifications in sympatric speciation processes.     

Motives,opportunities, and risks for private sector investment in protected areas with international importance: evidence from German companies

What motives do companies have to make a voluntary contribution to the protection and conservation of ecosystems? Could an international market for protected area certificates (PACs)—issued for geographical areas managed in accordance with social and environmental best practices—boost private investment? What are the market opportunities and risks that influence private sector investment? These questions are evaluated based on semi-structured expert interviews conducted in 39 German companies. Triangulation is used for data analysis to combine the advantages of qualitative and quantitative methods. Qualitative interview results complemented with the exploratory factor analysis allow identifying five motives for private sector investment, of which three are key motives in the early stage of developing PACs: direct financial benefits; the social legitimacy of entrepreneurial business; and the corporate dependency on ecosystems. Opportunities for private companies arise from the high marketing potential of certificates, the international orientation of the PAC market, and the bundling of different ecosystem benefits. Identified risks include a lack of differentiation, additional costs, and green washing. Depending on the transparency of the certification scheme, companies are aware that PACs could both improve and damage their credibility and reputation.     

Reply to the EFSA (2016) on the relevance of recent publications (Hofmann et al. 2014, 2016) on environmental risk assessment and management of Bt-maize events (MON810, Bt11 and 1507)

In this commentary, we respond to a report of the EFSA GMO Panel (EFSA EFSA Supp Publ, 1) that criticises the outcomes of two studies published in this journal (Hofmann et al. Environ Sci Eur 26: 24, 2; Environ Sci Eur 28: 14, 3). Both publications relate to the environmental risk assessment and management of Bt-maize, including maize events MON810, Bt11 and maize 1507. The results of Hofmann et al. (Environ Sci Eur 26: 24, 2), using standardised pollen mass filter deposition measurements, indicated that the EFSA Panel model had underestimated pollen deposition and, hence, exposure of non-target organisms to Bt-maize pollen. The results implied a need for safety buffer distances in the kilometre range for protected nature reserve areas instead of the 20–30 m range recommended by the EFSA Panel. As a result, the EFSA Panel revised their model (EFSA EFSA J 13: 4127, 4), adopting the slope of the empirical data from Hofmann et al. The intercept, however, was substantially reduced to less than 1% at one point by introducing further assumptions based on the estimates of mainly panel members, citing possible ‘uncertainty’. Hofmann et al. (Environ Sci Eur 28: 14, 3) published extensive empirical data regarding pollen deposition on leaves. These results were part of a larger 3-year study involving detailed measurements of pollen release, dispersal and deposition over the maize flowering period. The data collected in situ confirmed the previous predictions of Hofmann et al. (Environ Sci Eur 26: 24, 2). Mean levels and observed variability of pollen deposition on maize and four lepidopteran host plants exceeded the assumptions and disagreed with the conclusions of the EFSA Panel. The EFSA Panel reacted in a report (EFSA EFSA Supp Publ, 1) criticising the methods and outcomes of the two published studies of Hofmann et al. while reaffirming their original recommendations. We respond here point-by-point, showing that the critique is not justified. Based on our results on Urtica leaf pollen density, we confirm the need for specific environmental impact assessments for Bt-maize cultivation with respect to protected habitats within isolation buffer distances in the kilometre range.     

Assessment of instream foam formation and quantification of foam in effluents

Although the foam formation on surface waters nowadays is not comparable with the foam “mountains” in the 1970s, it still is an issue of water quality concern. A drawback in the discussion is the lack of methods to assess instream foam formation and foam emitted by point sources. Foam formation on a transboundary river in Austria led to an intensive study resulting in two parameters to quantify instream and emitted foam. Foam potential is introduced as emission parameter that is defined as flow rate of river water, which can foam due to an effluent’s discharge. The foam index (FI) represents a parameter to assess the foam on the river and allows a semi-quantitative differentiation between the varying foaming conditions. This publication will present the developed methods and show some results to prove their accuracy and applicability.     

Reference conditions for rivers of the German Baltic Sea catchment: reconstructing nutrient regimes using the model MONERIS

We introduce an approach for establishing reference conditions (RC) for rivers of the German Baltic Sea catchment, based on predictive modelling. An extensive data set of statistics from the year 1880 was coupled with literature data, providing a comprehensive basis for the calculation of regional historical nutrient emissions into rivers, river nutrient concentrations, and nutrient loading into the sea. Four different scenarios were calculated: scenario 1 assumed RC following previously established criteria for lakes (Poikane et al. in Environ Manag 45(6):1286–1298, 2010), scenario 4 applied the nutrient emission conditions of 1880 (considering non-intensive land usage, the presence of tile drainage systems, sewer systems, and the human population from 1880), and scenarios 2 and 3 considered intermediate conditions. Our results showed that nutrient emissions from scenario 1 accounted for approximately one-tenth of the currently observed total nitrogen (TN) and total phosphorus (TP) emissions. The nutrient emissions calculated for 1880 (scenario 4) were found to be 47 % (TN) and 55 % (TP) higher than those calculated considering reference lake conditions (scenario 1). Our results suggest that RC nutrient concentrations in rivers in the German Baltic Sea catchment were clearly below 0.05 mg/l for TP and 1 mg/l for TN. This range is in accordance with historical and calculated pristine nutrient concentrations from other rivers in similar catchments.     

Noninvasive characterization of the Trecate (Italy) crude-oil contaminated site: links between contamination and geophysical signals

The characterization of contaminated sites can benefit from the supplementation of direct investigations with a set of less invasive and more extensive measurements. A combination of geophysical methods and direct push techniques for contaminated land characterization has been proposed within the EU FP7 project ModelPROBE and the affiliated project SoilCAM. In this paper, we present results of the investigations conducted at the Trecate field site (NW Italy), which was affected in 1994 by crude oil contamination. The less invasive investigations include ground-penetrating radar (GPR), electrical resistivity tomography (ERT), and electromagnetic induction (EMI) surveys, together with direct push sampling and soil electrical conductivity (EC) logs. Many of the geophysical measurements were conducted in time-lapse mode in order to separate static and dynamic signals, the latter being linked to strong seasonal changes in water table elevations. The main challenge was to extract significant geophysical signals linked to contamination from the mix of geological and hydrological signals present at the site. The most significant aspects of this characterization are: (a) the geometrical link between the distribution of contamination and the site’s heterogeneity, with particular regard to the presence of less permeable layers, as evidenced by the extensive surface geophysical measurements; and (b) the link between contamination and specific geophysical signals, particularly evident from cross-hole measurements. The extensive work conducted at the Trecate site shows how a combination of direct (e.g., chemical) and indirect (e.g., geophysical) investigations can lead to a comprehensive and solid understanding of a contaminated site’s mechanisms.